SKU: VEK90812

VELCRO 90812 90812 Heavy Duty Extreme Outdoor

$9.97
PK
(No reviews yet) Write a Review
VELCRO 90812 90812 Heavy Duty Extreme Outdoor
  • Sticks to most rough surfaces
  • Requires time for adhesive to set before mating the hook and loop
  • Adhesive is water-resistant
  • Designed for permanently placing items

Adhesive sticks to most rough surfaces such as brick, wood, concrete and more and requires time for adhesive to set before mating the hook and loop so you have time to reposition. Adhesive is also water-resistant. Extreme tape is designed for permanently placing items.

More from the Manufacturer

General Information
Manufacturer:Velcro Companies
Manufacturer Part Number:90812
Brand Name:VELCRO®
Product Line:Extreme
Product Name:90812 Heavy Duty Extreme Outdoor
Marketing Information:

Adhesive sticks to most rough surfaces such as brick, wood, concrete and more and requires time for adhesive to set before mating the hook and loop so you have time to reposition. Adhesive is also water-resistant. Extreme tape is designed for permanently placing items.

More from the Manufacturer


Packaged Quantity:10 / Carton
Product Type:Hook & Loop Fastener
Product Information
Tape Width:1"
Tape Length:4"
Application/Usage:
  • Brick
  • Wood
  • Concrete
  • Outdoor

Features:Heavy Duty
Reliability
Durability:
  • Water Resistant
  • UV Resistant

Physical Characteristics
Product Color:
  • Gray
  • Titanium

Product Material:Polyester
Miscellaneous
Additional Information:Shape:

Strips

Care and Application:

Instructions:

  • Clean and dry surface before application
  • Peel tape from fastener and press firmly into place
  • Adhesive reaches maximum strength after 24 hours

Note: Recommended for temperatures between 0°F to 140°F. Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener. May not adhere well to certain types of brick - testing is recommended.

Removal Instructions:

  • Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
  • Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
  • Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
  • Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
  • Stick the ball on the adhesive which is on your substrate and pull it off
  • Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
  • If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners

Weight Rating:

1 lbs per square inch up to 15 lbs

Functional Temperature Range:

0-140° F (-18-60° C)


Recycled:No
Assembly Required:No
Country of Origin:United States